Home
 |
What is the secret to removing the rear axles to replace the bearings on a 2000 GMC Safari 2WD?In: GMC Safari [Edit categories] |
[Edit] |
[Edit] 
you need to remove the rear axle cover then remove gear holding bolt usually a 8mm bolt head then remove pin about a inch in diameter, turn rear gears until you can sccess c-clips from axle with magnet then remove rear whells and brake drums then pull the axles out.
First answer by Dropped71. Last edit by Dropped71. Contributor trust: 11 [recommend contributor]. Question popularity: 5 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > GM and GMC > GMC Safari > What is the secret to removing the rear axles to replace the bearings on a 2000 GMC Safari 2WD?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
Rear axles gmc jimmy? How do I remove the rear axles on a 2000 GMC Safari Van? What is the trick to remove the rear axles to replace the bearings on a 2000 GMC Safari 2WD?
