 |
How do you fix the front brake pads on a 2003 Chevy Malibu LS?In: Chevy Malibu |
[Edit] |
Answer
Hey Joshua===Remove the front wheels then take out the two pins that hold the calipers which requires a 3/8 allen wrench. Then pry the piston in some to be able to remove if off of the rotor. remove the caliper from the rotor and hang it with a coat hanger so it doesn't hang by the hose. Take the pads out and with a "C" clamp push the piston completely in the caliper. Install the new pads using the grease or shims included with them. and simply put it back together. Don't forget to pump up the brakes when you get ready to move it as you will have NO brakes until you do. GoodluckJoe
Answer
On my 2000 I had bolts, 12mm and 13mm. Once they are removed the whole assy came out. Watch which pad is in which way, the pad with the sqweeler tab goes to the inside. Clean everything and let dry before installing new parts. I put in top of the line parts for about $170.
First answer by Joe JOhns. Last edit by ID1157389670. Question popularity: 89 [recommend question]
|
Research your answer: |
- Fixing rust on under gas cap on 1997 malibu?
- Where is the spark plug location on a 1997 2.4 liter chevy malibu 4cyl automatic?
- On a1999 the three sparkplug in the back after you get the wire off do you have to take heat shield off to get the socket on the pluge because iam haveing ahard time getting the socket on pluge?
- How to rmove front brake rotor 2001 chevy malibu?
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Chevrolet > Chevy Malibu > How do you fix the front brake pads on a 2003 Chevy Malibu LS?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
